QuakeGuy

This was my first toy that has an actual cervix designed with a reservoir behind it - all these years I didn't know what I was missing! The sensation of it kissing your head and gently sucking you in really adds to the fantasy, and when you finish you're *completely* emptied! normally with closed-end toys you have to back-out just a little while finishing to create a vacuum-space otherwise you'll experience back-pressure which can sometimes lead to an incomplete emission, but not with this design! Just be aware of its retention capacity when cleaning/drying, I was able to at least get the wine bottle to cup around the internal entrance and flush it out with suds.

The skin on the front side is also textured to add realism and improve grip, the material is I would say medium-hard, which is kinda necessary because it has no bone-structure, still requires some practice to get the right holding positions to avoid flopping and going out of alignment. The weight and size are just about right for exploring a full range of positions, including standing. It's a bit tricky to get started though, as the vaginal tunnel entrance seems to be set back a little from where you would expect, and you really want to have at least one hand free to push all the air out before first insertion.

Overall great design, inside and out!

This was my very first onahole (purchased through J-List, before I discovered ToyDemon,) and is still in my Top-5 for producing the most powerful orgasm reflex. Funny story, I think TPE may have some triboelectric properties, because on first insertion, something inside "popped" and I saw a flash of pink light emanating from inside! It's still the tightest toy I own, and is incredibly stimulating. Owing to its size and quality, this one is sure to accompany me when I go on road trips. Only sign of wear after all these years is a small tear on the interior labia (the second layer,) I may attempt to safe-end this crack with the soldering iron on lowest settings if it shows any signs of expanding. It was also with this toy that I had the idea of cleaning with a wine bottle (it works so well I'll be sure to mention it everywhere!)

This toy has a life-size profile of a woman's hips & lower-midriff with a flat base. The box art is quite nice, it's almost big enough to be considered a lewd poster, lol. Handling the acute angles on the bottom edges can be a little odd in any position excluding Missionary/Mating-Press, but it's not necessarily a problem and the reduced weight because of this coupled with the stabilizing internal structure opens up a lot of possibilities. I love the curves below her belly, there's something about that slight depression above her pelvic floor that is just so arousing, and you can even feel the depth of penetration if you can reach to cup your hand over it during intercourse. Normally closed-hole designs require me to back-out a little to create a vacuum-space before finishing, but this one has such a deep vaginal hole that it allows one final thrust at the moment of climax, which just is the best! Cleaning is super simple if you use a wine bottle, and the flat base simplifies storage.

Very nice! She arrived with some separation between the labia and the layer below, so a bit of touch-up with the soldering iron at lowest setting did the trick. I think I've found my new favorite shower toy, she has a nice broad interface zone around the vagina for lap-bouncing action at a realistic contact surface scale while weighing significantly less than the original EPH-1. The EPH-1 is still great in bed, but somewhat unwieldy in a standing position and at ~5kg I was starting to get RSI in the ligaments of my arms & hands because I was lasting too long (must be all of the noise in the shower setting and the dampening effect on the orgasm reflex by the sympathetic nervous system maintaining a standing balance?) With Chi-Ko Binbin at just ~3kg, I could go even longer without any buildup of strain. I kept her on a towel after the shower and found myself reaching for her while watching a movie and before I knew it we were fooling around and "double-dipping" again :)

Anyway, her inner layer is harder (a little more hardness than EPH-1) than the exterior so detail & sensation are quite appreciable. Her size & weight distribution are just perfect for handling in many scenarios like reclining, kneeling, sitting on a balance ball, laying on back or balancing on top, her thick lips and deep vaginal canal have a satisfying grip down to the hilt (average length here, the tunnel is quite deep!) and she has just the right amount of material behind the flanged buttocks to make a gratifying "plap!" sound with each impact in most positions.

Cleaning is easy over the kitchen sink if you have an empty wine bottle quarter-filled with warm water and some mild, non-allergenic laundry detergent (the one with baking soda seems to leave a small positive PH after rinsing that keeps anything from growing that might cause odor from past experience with other toys.) I am surprised by how versatile she can be, and am very satisfied regarding the design and durability thus far. I won't bother with the anal entrance because from the screenshots it is too shallow and could potentially break into the vaginal canal.

I have mixed feelings about this one. The mass is good, but the material is almost too soft to support its own weight even when held from both sides. It will deform substantially in response to impacts, reminds of jello.

Speaking of Jello; this is the kind of material that, once a surface defect forms it will continue to separate when stressed. I suspect this might be happening inside the vaginal cavity because it seems waaaay too wide horizontally, as if a crack had formed in the left wall and continues to grow when .. stressed. At this point it just feels like a loose wet towel inside, the only sensation provided by the zero-diameter entrance. There is no tightness whatsoever beyond that point, and I'm about average size. Oh well, the size/weight is a plus, though it's just too soft to hold any shape.