Raptor Reptile Stroker
- Brand: Creature Cocks
- Added: End 2023
- Series: Creature Cocks
|Country of Origin||China|
|Net Weight (lbs)||1.49|
|Dim. (L x W x H in.)||L: 8.7 Insertable: 7.25 Diameter: 3.5|
|Tunnel Length (In.)||7.25|
|Material||TPE, TPR / ABS Plastic, Silicone|
|# of Holes||1 Hole|
|Hole Design||Closed Hole|
|Hole Construction||Single Layer|
Your sexy dreams of serpents, lizards, dinosaurs or dragons are about to become more realistic! This stroker has soft green color and reptile skin with a small slit for an opening. Inside the stroker are rows of textured ribs, grooves and nubs to drive you crazy as you dip yourself inside and enjoy pumping into the tight hole. Control the pressure and suction by using the silicone plug at the base of the case. Keep it in and each pump will add a little pressure and suction for a tighter squeeze! Remove the plug to release it. The case is open ended once the plug is removed so that you can easily rinse and let the water run through it. For an even more thorough clean up process, remove the stroker sleeve and wash it separately before letting it air dry. Place the cap on top once the sleeve is reinserted to keep it free of dust and debris. Use only with water-based lubricants. Enjoy indulging in your kinky fantasies of sci-fi or horror as you give into your dark desires!
You'd been curious what was beyond the known lands that have been charted and mapped, so after you headed out with a team to explore the deep caves beneath the Earth's surface, you were searching for something you'd never seen before. As you descend on your solo journey, your expedition team waiting at the base camp, you are eager to get in and get out. It's hot below the surface. Of course, it is usually cold and dark but what you and your team discovered changed all assumptions about what is hidden below. Specialty caves carved out by giant beings, scrapes and claw marks on the walls, created a small city below the surface! Each one of them was close enough to a lava vein to keep it nice and hot. Sweating and wet, you take off your shirt and take a break to drink some of your iced water. Your vision feels hazy, you're exhausted, and as hard as you try to fight it, you start to fall asleep. With a jolt you wake! There's something holding your arm. You open your eyes and come face to face with a lizard creature! Their green, scaled skin and large yellow eyes put you into a state of shock and you scream! The lizard hisses and pounces on you, pinning you so you stay still. It is as large as you are, muscled and lean with a human-like form around the breasts and face. It isn't quite a lizard or human, but something in between. It starts to make a purring sound, deep in its throat, and flick its tongue. It pulls your pants off as its nose sniffs for something like a dog would. As soon as your pants are off you rod springs free, hard and twitching despite your best effort to calm it! The lizard creature climbs on top, its strong, taloned claws holding you down so you can't move, its tail swishing from side to side, and then begins to rub against your shaft. As it does, its eyes close slightly and you can feel it begin to open up. Your shaft slips inside its wet slit and the tight squeeze around your shaft makes you gasp! As it rides you it keeps purring, writhing and grinding until you both climax in the hot caves beneath the earth!
- Case: 8.7 inches Length x 3.5 inches Width.
- Insertion depth: 7.25 inches.
Materials: Masturbator: TPE. Case: ABS plastic, silicone
Note: Use only with water-based lubricants.
- Fantasy Stroker: This soft green colored stroker is designed with skin like a reptile so you can have the Lizard Girl or Dragon Girl of your dreams!
- Soft and Stretchy: This soft, plush and stretchy TPE stroker is the perfect addition to upgrade your solo sessions!
- Open Ended: Clean up is easy with this open-ended design! You can also remove the sleeve to thoroughly wash and dry it between uses.
- Texture and Pressure: The inside is textured with nubs and grooves to drive you wild! Add suction and pressure by keeping the silicone plug inside the base, or remove it for less pressure.