I normally choose closed-hole designs because the lube can't go anywhere, but I finally found a transparent hip, "Puni Ana SukeSuke DX", and got curious. the problem of lube loss is definitely there, plugging the top through-hole only diverts it down to the anal tunnel from the top, and plugging both tunnels would be almost impossible. What do?
PrestigiousFarmer ( 140 )
@QuakeGuy
As slvstk said, you can cut up an old or unwanted onahole to about golf ball size pieces. I've done this to plug up connecting tunnels on the cheap and it works fine. Some onas also have small tpe balls that you insert as a gimmick like Purudama by A-One, not sold here at Toydemon. Those work great too. I just insert it at the back end of my Puni Ana, making sure to block off all the tunnels where they meet. It should block all tunnels if golf ball size. When it's time to clean just remove and clean the ball or cut tpe. That way everything can air dry much more quickly.
As slvstk said, you can cut up an old or unwanted onahole to about golf ball size pieces. I've done this to plug up connecting tunnels on the cheap and it works fine. Some onas also have small tpe balls that you insert as a gimmick like Purudama by A-One, not sold here at Toydemon. Those work great too. I just insert it at the back end of my Puni Ana, making sure to block off all the tunnels where they meet. It should block all tunnels if golf ball size. When it's time to clean just remove and clean the ball or cut tpe. That way everything can air dry much more quickly.
slvstk ( 128 )
@QuakeGuy the simple solution would just be to use both holes alternately. I do that often with the one hip I own, that has a connected tunnel. But since you have a hip that also has a through hole, you might be able to fashion a long plug from compatible material (maybe from an old toy) that could extend from the through-hole into the end of one of the holes.